Not only Bays are modular but components are also fabricated in folded construction. The major advantage would be minimum welding to avoid deformation of fabricated components, beside stocking of critical fabrication components to expediate delivery of panels..
The components are totally interchangeable and offer instant replacement if required. Electroplated slotted supports are provided in cable alleys for binding of cable brass concealed hinge with neoprene gasket is used in each door Cut-Outs are made in fabrication only to avoid life reduction of paint.
DIESEL HEATING SYSTEM
With
time & again, it has been established that chemical pretreatment (Seven
Tank System), Employing HOT CHEMICAL System is much better than cold
& effective. A perfect layer of phosphate is very essential to achieve
perfect and durable of paint layer. Traditional elect heating system has draw
back's of depending on electrical supply, which is not
consistently available is present shortage of power also steady load on dg set
is not usual practice
Vidhyut
used and unique method for an ideal pretreatment. It has got burner controlled
Heating Tanks thus at bottom the water subjected to stir &does not allow
the chemical to deposit at bottom in addition to give the desired temperature.
PAINTING
After through chemical
pretreatment, the equipment are painted in a conveyrised powder coating plant
with high quality Epoxy Polyster Powder, thus giving a long life to panel and
good aesthetics. The standard finish is SIEMENS Preferable Grey
(RAL7032) Mounting Arrangement in orange (RAL 2000).
STANDARDS APPLICABLE :IS-
5000 Series MCCS are
manufactured with 14 SWG Smooth & Wrinkle free CRCA Sheet (Produced for
reliable manufacture like SAIL BHUSHAN Etc.) With stress removed in complete
folding construction equipped with brake press, shearing M/C,
nibbling M/C, spot welding, power presses, employing expensive tooling thus
ensuring precise fabricated components for the smooth & wrinkle freed
enclosures following subsections are fabricated.
The enclosure is fabricated in
a modular construction i.e. each Bay is identical & can be assembled or
dismantled easily in shorter time which is not feasible in total welded Bay.
Not Only Bays are modular, components are also fabricated in folded
construction. The major advantage would be minimum welding to avoid
deformation of fabricated components beside stocking of critical fabrication
components.
|
